Place the black oval button in the newspaper. If the button will balance itself, you may need to press the button on a clothespin, linking it closely so you can paint on it. Paint the shield of the Cullen on the button with black necklace choker paint pen, the copy of the image of the Cullen family crest is printed above. Place the tape around his neck, measuring the amount of tape needed to form a black necklace choker with ribbon ends up joining and crossing over the other in the hollow of your throat. Hold the tape carefully on the base of the throat, pinching the center, together lightly. Trim the ends of the tape with scissors, leaving about 2 inches of extra tape on each side is part of the film will rely on its neck, is dragged across the collarbone area. Measure 2 inches from one end of the tape with the right side of the tape up. Sew one side of the square of velcro in this space with a simple stitch. Measure 2 inches from the other end of the tape, this time in the bottom of the tape. Sew the other half of the square of velcro here. Place the Cullen family crest button directly on the opposite side of the tape in the second place of Velcro (the button should be on the tape with the square of Velcro on the bottom). Sew the button in this position, fixing it firmly. Be careful when working the needle slowly through the tape and velcro, and you have to go through two layers. Trim loose threads. . . .